The waterproofing membrane is a skinny layer of waterproofing layer that is to be found on the surface; a constant layer that doesn’t let water to go through. Such as: on a flat roof, a waterproofing membrane may be positioned over the structural slab as well as under the finish tiles.
Basically the process of making a surface waterproofing so that it remains unaffected by water.
So as to water-resistant the surface, different types of waterproofing membrane can be utilized depending on the situation.
Types of Waterproofing Membrane:
#1: Liquid Waterproofing Membrane
In liquid waterproofing membranes, the primer coat is applied on the surface, and then two coats of topcoat either with spray or roller brush. This liquid forms a layer of rubbery on the wall.
#2: Cement Waterproofing Method
These cement waterproofing methods are used during the construction process of the building; it is one of the simplest methods used in almost all buildings for wet and internal areas like the bathroom.
#3: Clear Waterproofing Membrane
A clear waterproofing membrane is the most excellent way to water-resistant the balcony as well as the bathroom without removing the tiles from the surface. It’s the easiest way to make your balcony resistant to water.
#4: Bituminous Coating Waterproofing Membrane
Covering by asphalt or bituminous coating waterproofing membranes is made from bitumen-based materials, an adaptable protective coat mainly founded on its construction & polymerization grade.
Flexibility and protection against the water can be affected by polymer grades and fibres reinforcement, the most common functions of bituminous coatings include areas that can be underneath moist rivets. It is an amazing protective coating as well as waterproofing agent on surfaces like concrete foundations.
#5: Polyurethane Liquid Waterproofing Membrane
Polyurethane liquid waterproofing membranes are applied to the flat area roof as well as exposed to weathering; polyurethane liquid membranes can provide great flexibility. They could be very sensitive to moisture content; because of this fact, care should be taken in evaluating the moisture of the concrete slab. In any case, membrane peeling or de-bonding can occur after some time.
#6: Bituminous Waterproofing Membrane
Bituminous waterproofing membranes are a popular method used for low-slope roofs because of their confirmed efficiency; the bituminous waterproofing membranes have a layer as well as a torch on the self-adhesive membranes. The Self-adhesive compound comprises asphalt, polymers, filler, resins, & oils in addition improve adhesion characteristics.
The self-adhesive has a short shelf life because of the bonding properties of the membrane and the weathering layer usually contains granular mineral aggregates to withstand weathering. For an assortment of membranes, the contractor uses a protective screw to stop the puncture of the membrane. They could be very sensitive to moisture content; because of this fact, care must be taken in evaluating the moisture of the concrete slab. In any case, membrane peeling or de-bonding can occur after some time
#7: Wall Waterproofing Membrane
Wall waterproofing membranes are an internally utilized moist wall solution that works by managing and controlling the ingress of water inside the hole between the membranes of the pit wall & basement wall. It directs water to an appropriate drainage system or sump pump.
Conclusion
The waterproofing membrane must be strong, flexible, elastic, and tear-resistant, therefore it can cover the cracks and runs along with the building. If the membrane is exposed to the sun, it should be UV stable.
We “Mahi Innovations” are one of the well-known manufacturers of Waterproofing Membranes, a cost-effective product for roof waterproofing necessities in any weather conditions with outstanding results. Due to high pressure and low-temperature resistance, these waterproofing membranes are broadly used in shielding natural & artificial high pressure tunnels.