Water tanks are exclusively made for the purpose of mass water storage in households and are generally constructed using a robust material such as concrete. But no matter which material one uses for building the water tanks, sometimes over a periods of 20-25 years, the material & its quality start getting deteriorate. This is one of the main problems faced in those areas which have concreted or cemented water tanks, which over a certain period leads to water leaking.
The problem of water tank leakages occurs because even if we use concrete to build the tanks, the concrete is a heterogeneous material having voids and capillaries with its matrix in the hardened stage. Therefore, it is very likely that water oozes in through these voids and capillaries & causes leakage.
Now we all know how water leakage can make a huge impact on us. Water leakage can not only cause water shortage, but the dripping water can also seep through the cervix end of the walls as well as ceilings and can penetrate inside, spoiling the complete construction and untimely water dripping. To keep all these problems mentioned in mind, Water Tank Waterproofing comes into the picture.
The Impetus Behind the Water Leaking Problems
As we already know what can be the effects of water tank leakages in the tanks. We should also delver deeper and understand what are the causes therefore as to adopt healthy practices such as water tank waterproofing.
In many cases, people stop paying attention to the construction factors such as little or no attention to the treatments of joints and excessive porosity because of which the water storage tanks fail to withstand the water pressure.
Leakage problems are likely to occur in concrete water tanks because of variable water pressure effects on their walls causing structural movement, resulting in cracks.
Inefficiency and materialism are main worries that breed the problem of leaks. Masons are not educated to add construction chemicals to the cement that, over time, because of constant water pressure, produce excessive pores throughout the tank structure.
In many cases, homeowners or even building managers don’t give the water tank its proper attention.
Since your water tank will be storing a good volume of water, it needs special treatment. If we take the current practice, the makers simply use a clean cement coat mixed with acrylic polymer or waterproof latex, or elastomeric. As a result, treatment has no effect and therefore they fail to perform under frequent water attacks. The inner walls of concrete tanks are generally finished with tiles that eventually from fungal and other bacterial growths. As a result, we may be consuming contaminated & polluted water.
Another feature that we often neglect about water tanks – under the ground and above the ground both is their outer walls. If the materials used for building is cement polymer slurry in place of concrete, then the protection necessary from soil and water pollution is difficult to obtain. Moreover, the treatment doesn’t work when it comes to holding the pressure of the groundwater. Poorly sealed holes in the walls of concrete water tanks are another main cause of possible leaks. Therefore, proper education and expert consultation are required before opting for Water Tank WaterproofingSolutions.
With our rich industry experience and learning, we at “Mahi Innovations” are occupied with offering magnificent quality Water Tank Waterproofing Service. This services includes inner waterproofing of tanks in several modern, private or business places. It is given by our structure care designs according to the specific requirements of customers. Our experts are prepared in executing these services inside a given timespan with perfection. Water seal waterproofing contractual workers will give you the correct waterproofing framework from this wide range of alternatives accessible, after carefully looking over, recoding & examining your concern.